FerMac 310/60

FerMac 310/60 Cell Culture

This version of the FerMac 310/60 has a vessel specifically designed for microbial culture.

Vessel Microbial

Key features

  • Specially designed, dish-based vessel with skirt for ease of handling
  • Integrated carrying/mounting handles
  • Gas flow system with dedicated flow control for Air, O2, CO2 and N2 
  • pH control by CO2 and liquid base addition.
  • Wide range of impeller designs and sizes
  • Poral (sintered) sparge tips available in various pore sizes
  • Lower speed range for mixing of all types of cells

This version of the FerMac 310/60 has a vessel specifically designed for cell culture. It has a dished-base to enable gentle but efficient mixing at low impeller speeds. The cell culture vessels are fitted a support skirt, making them free-standing and therefore easier to handle, especially when preparing and autoclaving.

Inside the vessel, the agitator has a low speed range which, combined with a wide range of impellor types and sizes, gives excellent mixing for all types of cells.

Vessel Microbial Bottom


The introduction of gases into the vessel is neatly and efficiently achieved by the gas flow/mixing plate fitted to the 310 stirrer. This provides automated control of Air, O2 N2 & CO2 into the bioreactor. Each of these gases has a dedicated flow meter (rotameter) with “easy change” flow tubes; allowing users to change flow rates to suit their application or for when changing bioreactor sizes. Alternatively, mass flow controllers are available.

Gas can be sparged through the media, into the head space, or both. Our microporous sparge gives excellent gas transfer, with a variety of pore-sizes and sparger tip types available.

Our attention to detail and focus on the user sets Electrolab equipment apart from its competitors.

Vessel Microbial Full

Get in touch

If you have any questions or require more information about the FerMac 310/60 then please get in touch.

Contact us